LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers And Washers >> Wipers And Washers >> Removal And Installation >> Windshield Washer Reservoir >> Installation

Windshield Washer Reservoir: Installation

  1. Install the windshield washer pump.
    • If necessary, install a new seal.
  2. Install the headlamp washer pump.
    • If necessary, install a new seal.
  3. Install the windshield washer reservoir.
    • Tighten the M6 bolts to 6 Nm (4 lb.ft).
    • Tighten the M8 bolt to 25 Nm (18 lb.ft).
  4. Connect the 2 hoses to the windshield washer reservoir pumps.
    • Connect the electrical connectors.
  5. Install the windshield washer reservoir filler neck.
    • If necessary, install a new seal.
    • Lubricate the seal.
    • Secure in the clip.
  6. Install the front bumper cover. Refer to Front Bumper Cover .
scientia non olet · About LEMON Manuals