LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.) >> Wiring Harnesses >> Wiring Harnesses >> Removal And Installation >> Front Parking Aid Camera Wiring Harness - Main Body Section (RHD AWD) >> Installation

Front Parking Aid Camera Wiring Harness - Main Body Section (RHD AWD): Installation

    CAUTION: Make sure that the camera overlay wiring harness is not bent excessively during this procedure. Failure to follow this instruction may result in damage to the harness.
  1. Install the camera overlay wiring harness
    GJ0014332
    2. NOTE: The left hand front camera wiring harness connectors are coloured magenta, the right hand front camera wiring harness connectors are coloured blue.
  2. Connect the electrical connector.
    GJ0014324
    3. CAUTION: Make sure that excessive force is not used when installing the tie straps to the wiring harness. Failure to follow this instruction may result in damage to the harness.
  3. Feed the camera overlay wiring harness along the main wiring harness to the camera module.
    • Using suitable tie straps, secure the camera overlay wiring harness to the main body wiring harness.
    4. NOTE: The left hand front camera wiring harness connectors are coloured white, the right hand front camera wiring harness connectors are coloured black.
  4. Connect the electrical connector.
    GJ0014363
  5. Install the wiring harness cover.
    • Secure the 3 clips.
    GJ0014341
  6. Install the LH scuff plate trim panel. Refer to: Scuff Plate Trim Panel information.
  7. Install the CJB. Refer to: Central Junction Box (CJB) information.
  8. Install the LH front seat. Refer to: Front Seat information.
scientia non olet · About LEMON Manuals