Liftgate Wiring Harness: Removal
- Open the liftgate and tailgate.
- Disconnect the battery ground cable. Refer to: Specifications
information.
- Remove the liftgate lower trim panel. Refer to: Liftgate Trim Panel
information.
- Remove the liftgate upper trim panel.
- Remove the liftgate side trim panel.
- Release the 5 clips.
- Repeat the above procedure for the other side.
- Remove the rear headliner trim panel.
- Release the 7 clips.
- Disconnect the electrical connector.
- Release the liftgate wiring harness.
- Disconnect the 2 electrical connectors.
- Release the grommet.
- Disconnect the high mounted stoplamp electrical connector.
- Disconnect both heated rear window electrical connectors.
- Disconnect the license plate lamp electrical connector.
- Disconnect the wiper motor electrical connector.
- If installed, disconnect the diversity amplifier electrical connector and antenna cable.
- If installed, disconnect the navigation system traffic amplifier electrical connector and antenna cable.
- Remove the liftgate wiring harness.
