LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.) >> Wiring Harnesses >> Wiring Harnesses >> Removal And Installation >> Liftgate Wiring Harness >> Installation

Liftgate Wiring Harness: Installation

  1. Install the liftgate wiring harness.
    • Secure the clips.
  2. If installed, connect the navigation system traffic amplifier electrical connector and antenna cable.
  3. If installed, connect the diversity amplifier electrical connector and antenna cable.
  4. Connect the wiper motor electrical connector.
  5. Connect the license plate lamp electrical connector.
  6. Connect the heated rear window electrical connectors.
  7. Connect the high mounted stoplamp electrical connector.
  8. Attach the liftgate wiring harness.
    • Install the grommet.
    • Connect the electrical connectors.
  9. Install the rear headliner trim panel.
    • Connect the electrical connector.
    • Secure with the clips.
  10. Install the liftgate side trim panel.
    • Secure with the clips.
    • Repeat the above procedure for the other side.
  11. Install the liftgate upper trim panel.
    • Secure with the clips.
  12. Install the liftgate lower trim panel. Refer to: Liftgate Trim Panel information.
  13. Connect the battery ground cable. Refer to: Specifications information.
scientia non olet · About LEMON Manuals