LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.) >> Wiring Harnesses >> Wiring Harnesses >> Removal And Installation >> Rear Parking Aid Camera Wiring Harness >> Removal

Rear Parking Aid Camera Wiring Harness: Removal

CAUTION: Make sure that the camera overlay wiring harness is not bent excessively during this procedure. Failure to follow this instruction may result in damage to the harness.
  1. Remove the LH D-pillar trim panel. Refer to: D-Pillar Trim Panel information.
  2. Remove the rear headliner trim panel.
    • Release the 7 clips.
    • Disconnect the electrical connector.
    GJ0014599
  3. Disconnect the electrical connector.
    GJ0019044
  4. Remove the LH front seat. Refer to: Front Seat information.
  5. Remove the LH scuff plate trim panel. Refer to: Scuff Plate Trim Panel information.
  6. Release the wiring harness cover.
    • Release the 3 clips.
    GJ0014341
  7. Disconnect the electrical connector.
    GJ0014361
scientia non olet · About LEMON Manuals