Hood Switch: Removal
NOTE:
Before installing a new hood switch, diagnose the hood switch by using a digital multimeter. Make sure that continuity through hood switch is present when the switch is pressed (hood closed condition). Repeat the test to make sure continuity IS NOT present when the switch IS NOT pressed. If the hood switch continuity is NOT present, continue with this procedure. If the continuity is present, install the original hood switch to the vehicle.
- Disconnect the battery ground cable. Refer to Specifications article.
- Release the RH hood latch.
- Remove the 2 Torx bolts.
- Disconnect the electrical connector.
- Remove the hood switch.
