Pinpoint Test B: Single Door Will Not Open From The Inside (But Opens From The Outside)
| TEST CONDITIONS | DETAILS/RESULTS/ACTIONS |
| B1: CHECK THE INTERIOR DOOR RELEASE CABLE TO INTERIOR DOOR HANDLE IS INSTALLED CORRECTLY | |
|
NOTE:
Figure A - Child lock off position shown 1
Make sure the child lock is disengaged (rear door only) |
|
| 2 Remove the door trim panel as necessary REFER to: Front Door Trim Panel / Rear Door Trim Panel . | |
| 3 Confirm the interior door release cable is correctly installed to the interior door handle | |
| Is the cable correctly installed? Yes GO to B2. No Connect the door release cable correctly. If the cable is damaged, install a new door release cable. Test the system for normal operation |
|
| TEST CONDITIONS | DETAILS/RESULTS/ACTIONS |
| B2: CHECK THE INTERIOR DOOR HANDLE RELEASE CONNECTION TO THE DOOR LATCH | |
| 1 Confirm the interior door handle release connection to the door latch is installed correctly | |
| Is the interior door handle release cable installed correctly? Yes GO to Pinpoint Test C. No Connect the door release cable correctly. If the cable is damaged, install a new door release cable. Test the system for normal operation |
|


