LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Handles, Locks, Latches & Entry Systems >> Handles, Locks, Latches And Entry Systems >> Removal And Installation >> Rear Door Latch >> Removal

Rear Door Latch: Removal

  1. Remove the rear door window motor and regulator assembly. Refer to Rear Door Window Regulator and Motor .
    2. CAUTION: Release the exterior door handle and screw cover clips from inside the door.
  2. Remove the rear door exterior handle. See EXTERIOR REAR DOOR HANDLE .
  3. Release the remote control cable.
    • Release the grommet.
  4. Release the door exterior handle mechanism.
    • Remove the 2 Torx screws.
    • Remove the locking pin.
  5. Remove the rear door latch assembly.
    • Disconnect the electrical connector.
    • Remove the 3 Torx screws.
    GJ0014634
    6. NOTE: Do not disassemble further if the component is removed for access only.
  6. Remove the door latch remote control cable.
    • Release the cable from the abutment bracket.
    • Remove the cable from the lever.
    GJ0012054
  7. Release the exterior door handle mechanism cable from the door latch.
    • Release the cable from the abutment bracket.
    • Remove the cable from the lever.
    GJ0012052
scientia non olet · About LEMON Manuals