LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumpers >> Bumpers >> Removal And Installation >> Rear Bumper Cover >> Installation

Rear Bumper Cover: Installation

    Vehicles with parking aid 

  1. Install the parking aid sensor trim panels.

    2. Vehicles with parking aid 

  2. Install the parking aid sensors.

    3. Vehicles with parking aid 

  3. Install the parking aid sensor wiring harness.
    • Connect the electrical connectors.
  4. Install the bumper insert.
    • If installed, secure the parking aid sensor wiring harness.
    • Tighten the screws.
  5. Install the rear bumper trim panel.
  6. Install the towing eye cover.
    • Tighten the screws.
  7. Install the rear bumper cover.
    • If installed, connect the parking aid sensor wiring harness electrical connector.
    • Secure with the clips.
    • Tighten the screws.
    • Tighten the bolts to 10 Nm (7 lb.ft).
  8. Install both rear quarter panel mouldings. Refer to Rear Quarter Panel Moulding .
  9. Install both of the rear lamp assemblies. Refer to Rear Lamp Assembly .
scientia non olet · About LEMON Manuals