LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Front End Body Panels >> Front End Body Panels >> Removal And Installation >> Fender >> Removal

Removal And Installation: Fender: Removal

  1. Disconnect the battery ground cable. Refer to Specifications information.
  2. Remove the plenum chamber panel. Refer to Plenum Chamber information.
  3. Remove the headlamp assembly. Refer to Headlamp Assembly information.
  4. Remove the fender splash shield. See Fender Splash Shield .
  5. Remove the fender molding. Refer to Fender Moulding information.
  6. Remove the fender lower molding.
    • Release the 4 clips.
      GJ0014603
  7. Remove the fender air intake grille.
    • Release the 4 clips.
    • Remove the air ducting.
      GJ0019418
  8. Remove the front fender.
    • Remove the 6 Torx bolts.
    • Remove the nut.
      GJ0019419
    9. NOTE: Do not disassemble further if the component is removed for access only.
  9. Remove the fender rear trim.
    • Remove the 3 clips.
      GJ0014607
scientia non olet · About LEMON Manuals