LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Front End Body Panels >> Front End Body Panels >> Removal And Installation >> Fender >> Installation

Removal And Installation: Fender: Installation

  1. Install the fender rear trim.
    • Secure in the 3 clips.
  2. Install the front fender.
    • Install the bolts and tighten to 10 Nm (7 lb.ft).
    • Install the nut and tighten to 10 Nm (7 lb.ft)
  3. Install the fender air intake grille.
    • Install the air ducting.
  4. Install the lower fender molding.
    • Secure in the clips.
  5. Install the fender molding. Refer to Fender Moulding information.
  6. Install the fender splash shield. See Fender Splash Shield .
  7. Install the headlamp assembly. Refer to Headlamp Assembly information.
  8. Install the plenum chamber panel. Refer to Plenum Chamber information.
  9. Connect the battery ground cable. Refer to Specifications information.
scientia non olet · About LEMON Manuals