LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Body & Frame >> Frames, Subframes & Crossmembers >> Full Frame And Body Mounting >> Full Frame And Body Mounting >> Removal And Installation >> Transmission Support CROSSMEMBER (V6 4.0L Petrol/TDV6 2.7L Diesel) >> Removal

Transmission Support CROSSMEMBER (V6 4.0L Petrol/TDV6 2.7L Diesel): Removal

    All vehicles 

    WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
  1. Raise and support the vehicle.
  2. Remove the transmission undershield.
    • Remove the 6 bolts.
    GJ0011948

    3. Vehicles with diesel engine 

  3. Release the 3 fuel lines.
    • Release from the 3 clips.
    GJ0014680
  4. Release the exhaust front mounting.
    GJ0014681

    5. Vehicles with petrol engine 

  5. Release the HO2S wiring harness and bracket from the crossmember.
    • Remove the 2 bolts.
    • Tie the bracket aside.
    GJ0011951

    6. All vehicles 

  6. Remove the transmission support insulator through-bolt.
    • Support the transfer case.
    GJ0014682
  7. Remove the crossmember.
    • Remove the 4 nuts and bolts.
    GJ0014683
scientia non olet · About LEMON Manuals