LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Body & Frame >> Frames, Subframes & Crossmembers >> Full Frame And Body Mounting >> Full Frame And Body Mounting >> Removal And Installation >> Body - (Petrol) >> Installation

Body - (Petrol): Installation

    All vehicles 

    CAUTION: Make sure that new bolts are installed.
    CAUTION: Make sure that all components are free and do not get caught up whilst lowering the body onto the integrated body frame.
  1. Using an assistant install the body to the integrated body frame.
    • Install the body mounts.
    • With assistance align the body and integrated body frame mounts.
    • Install the bolts, but do not tighten fully at this stage.
    GJ0013611
  2. Remove the tie down straps securing the body.
  3. TORQUE: 133 Nm
    GJ0013611
  4. See figure.
    GJ0013613
  5. TORQUE: 25 Nm
    GJ0013177
  6. See figure.
    GJ0013603
  7. See figure.
    GJ0013606
  8. TORQUE: 12 Nm
    GJ0013260
  9. TORQUE: 12 Nm
    GJ0013605
  10. See figure.
    GJ0013602
  11. See figure.
    GJ0013601
  12. TORQUE: 12 Nm
    GJ0013614
  13. Refer to Fuel Filler Door Assembly information.
  14. NOTE: Remove and discard the blanking caps.
  15. TORQUE: 16 Nm
    • Clean the component mating faces.
    • Secure the clip.
    GJ0013600
  16. NOTE: Remove and discard the blanking caps.
  17. TORQUE: 16 Nm
    • Clean the component mating faces.
    • Secure the clip.
    GJ0013599
  18. NOTE: Remove and discard the blanking caps.
  19. TORQUE: 16 Nm
    • Clean the component mating faces.
    • Secure the clip.
    GJ0013595
  20. NOTE: Remove and discard the blanking caps.
  21. TORQUE: 16 Nm
    • Clean the component mating faces.
    • Secure the clip.
    GJ0013594
  22. WARNING: Make sure that a new bolt is installed.
  23. TORQUE: 25 Nm
    GJ0013604
  24. See figure.
    GJ0013586
  25. See figure.
    GJ0013591
  26. See figure.
    GJ0013587
  27. TORQUE: 12 Nm
    GJ0013588
  28. See figure.
    GJ0013589
  29. TORQUE: 20 Nm
    GJ0013580
  30. See figure.
    GJ0013590
  31. See figure.
    GJ0013592
  32. See figure.
    GJ0013593
  33. TORQUE: 20 Nm
    GJ0013585
  34. See figure.
    GJ0012115
  35. See figure.
    GJ0012107
  36. See figure.
    GJ0013596
  37. CAUTION: Make sure that all openings are sealed. Use new blanking caps.
  38. TORQUE: 12 Nm
    • Install new O-ring seals.
    GJ0012968
  39. CAUTION: Make sure that all openings are sealed. Use new blanking caps.
  40. TORQUE: 12 Nm
    • Install new O-ring seals.
    GJ0012969
  41. WARNING: Be prepared to collect escaping fluid.
  42. See figure.
    GJ0013959
  43. See figure.
    GJ0013961
  44. See figure.
    GJ0013578
  45. See figure.
    GJ0013577
  46. TORQUE: 8 Nm
    GJ0013576
  47. Refer to Auxiliary Battery Tray information.
  48. TORQUE: 10 Nm
    GJ0013960
  49. Refer to Coolant Expansion Tank information.
    GJ0012535
  50. Vehicles with active damping 

  51. See figure.
    GJ0013574
  52. All vehicles 

  53. TORQUE: 10 Nm
    GJ0013579
  54. All vehicles 

  55. Refer to Rear Bumper Cover information.
  56. Refer to Air Cleaner LH information.
  57. Refer to Air Cleaner RH information.
  58. See figure.
    GJ0013573
  59. TORQUE: 10 Nm
    GJ0013958
  60. See figure.
    GJ0012455
  61. See figure.
    GJ0013572
  62. NOTE: RHD illustration shown, LHD is similar.
  63. See figure.
    GJ0012452
  64. See figure.
    GJ0013570
  65. See figure.
    GJ0013571
  66. Refer to Air Conditioning (A/C) System Recovery, Evacuation and Charging information.
  67. Refer to Battery information.
  68. Bleed the braking system. Refer to Brake System Bleeding information.
  69. Check and top-up the coolant.