LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Body & Frame >> Windows >> Glass, Frames And Mechanisms >> Glass, Frames And Mechanisms >> Diagnosis And Testing >> Glass, Frames And Mechanisms >> Door Window Glass Retaining Bracket Adjustment Procedure

Door Window Glass Retaining Bracket Adjustment Procedure

  1. Remove the door window glass as necessary. See FRONT DOOR WINDOW GLASS  and REAR DOOR WINDOW GLASS .
  2. Check for any foreign material or obstruction in the door window glass seal and channels. Clean all areas prior to adjustment to allow correct alignment.
  3. Release but do not remove the door window glass retaining bracket(s) bolt(s).
  4. Push the door window glass retaining bracket(s) to the edge of the door window glass to achieve minimum parallel gap.
  5. Tighten the door window glass retaining bracket(s) bolt(s).
    • Tighten the retaining bolt(s) to 6Nm.
    GJ0018832
  6. Apply lubricate (RYL500010) to the lower part of the door window glass retaining brackets prior to installation of the door window glass.
  7. Install the door window glass as necessary. See FRONT DOOR WINDOW GLASS . and REAR DOOR WINDOW GLASS .
  8. Check the system for normal operation.
scientia non olet · About LEMON Manuals