LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Rear Disc Brake >> Rear Disc Brake >> Removal And Installation >> Brake Disc >> Installation

Brake Disc: Installation

  1. Make sure that the rear brake disc and hub mating surfaces are clean.
  2. Install the rear brake disc.
    • Tighten the bolt to 35 Nm (26 lb.ft).
  3. Install the brake caliper and anchor plate.
    • Tighten the bolts to 115 Nm (85 lb.ft).
  4. Adjust the parking brake. Refer to Parking Brake Shoe and Lining Adjustment article.
  5. Install the rear wheel and tire.
    • Tighten the wheel nuts to 140 Nm (103 lb.ft).
  6. Refer to Brake Pad Bedding-In article.
scientia non olet · About LEMON Manuals