LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Front Drive HALFSHAFTS >> Front Drive HALFSHAFTS >> Removal And Installation >> Inner Constant Velocity (CV) Joint Boot >> Installation

Inner Constant Velocity (CV) Joint Boot: Installation

  1. Clean the components.
  2. Install the inner joint boot.
  3. Install the inner joint.
    • Install a new snap ring.
    • Position the CV joint on the halfshaft, press the snap ring into it's groove and push the CV joint fully on to the halfshaft.
    • Pull on the CV joint to ensure the snap ring has fully engaged.
  4. Pack the joint with the grease supplied.
  5. Install the CV joint boot to the CV joint.
    • Secure with the new clamps.
  6. Install the halfshaft. See Halfshaft LH .
  7. Install the wheel and tire.
    • Tighten the wheel nuts to 140 Nm (103 lb.ft).
scientia non olet · About LEMON Manuals