LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Drive Axle/Differential >> Rear Drive Axle/Differential >> In-Vehicle Procedures >> Rear Axle Oil Temperature Sensor >> Installation

Rear Axle Oil Temperature Sensor: Installation

  1. Clean the component mating faces.
  2. Install the oil temperature sensor.
    • Tighten to 22 Nm (16 lb.ft).
  3. Connect the electrical connector.
    • Secure the wiring harness clip.
  4. Fill the differential with the correct amount of lubricant. See Differential Draining and Filling .
scientia non olet · About LEMON Manuals