LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Differentials & Drive Axles >> Rear Drive Axle/Differential >> Rear Drive Axle/Differential >> In-Vehicle Procedures >> Differential Locking Module >> Installation

Differential Locking Module: Installation

  1. Install the differential locking module.
    • Install the bolts and tighten to 10 Nm (7 lb.ft).
    • Connect and secure the electrical connectors.
  2. Install the parking aid module.
    • Tighten the nuts to 10 Nm (7 lb.ft).
  3. Install the rear quarter trim panel. Refer to Rear Quarter Trim Panel article.
  4. Connect the battery ground cable. Refer to Specifications article.
  5. Use T4 to calibrate a new differential locking module.
scientia non olet · About LEMON Manuals