LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling >> Engine Cooling V8 5.0L Petrol >> Removal And Installation >> Radiator >> Removal

Removal And Installation: Radiator: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the battery ground cable. Refer to Specifications .
    2. WARNING: Make sure to support the vehicle with axle stands.
  2. Raise and support the vehicle.
  3. Refer to Air Conditioning (A/C) System Recovery, Evacuation and Charging .
  4. Cooling System Draining, Filling and Bleeding. Refer to: COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
  5. Refer to Radiator Grille .
  6. See COOLING FAN .
  7. See figure
    GJ0012934
  8. See figure
    GJ0012935
  9. See figure
    GJ0012936
  10. Torque: 9 Nm
    GJ0012937
  11. See figure
    GJ0012938
  12. Torque: 9 Nm
    GJ0012939
    13. CAUTION: Before disconnecting or removing the components, make sure the area around the joint faces and connections are clean. Plug open connections to prevent contamination.
  13. Torque: 10 Nm
    GJ0012940
  14. See figure
    GJ0012941
  15. See figure
    GJ0012942
  16. See figure
    GJ0012943
    17. CAUTION: Always protect the cooling pack elements to prevent accidental damage.
  17. Torque: 25 Nm
    GJ0012944
    18. NOTE: Do not disassemble further if the component is removed for access only.
  18. Torque: 10 Nm
    GJ0012945
  19. Torque: 10 Nm
    GJ0012946
  20. See figure
    GJ0012933
scientia non olet · About LEMON Manuals