Thermostat Housing: Removal
NOTE:
Removal steps in this procedure may contain installation details.
- Disconnect the battery ground cable. Refer to Specifications .
- Raise and support the vehicle.
- Cooling System Draining, Filling and Bleeding. Refer to: COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
- Refer to Air Cleaner Outlet Pipe T-Connector .
- Refer to Air Cleaner Outlet Pipe LH .
- See figure
- See figure
- Torque: 10 Nm
- See figure
WARNING:
Make sure to support the vehicle with axle stands.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
NOTE:
The retaining clips cannot be removed from the pipe.
