Front Door Trim Panel: Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
- Disconnect the tweeter speaker electrical connector.
- See figure.
- See figure.
- See figure.CAUTION: Take extra care not to damage the component. Apply masking tape to the end of the screwdriver.CAUTION: When removing the chrome finisher from the trim panel, make sure the components are not damaged. If necessary protect the surrounding areas using masking tape.CAUTION: Make sure that the clips are correctly located.
- See figure.CAUTION: Take extra care not to damage the component. Apply masking tape to the end of the screwdriver.CAUTION: When removing the chrome finisher from the trim panel, make sure the components are not damaged. If necessary protect the surrounding areas using masking tape.CAUTION: Make sure that the clips are correctly located.
- See figure.
- See figure.
- See figure.
- See figure.
- See figure.
- Detach the front door trim panel.
- See figure.
- See figure.
- See figure.
- See figure.CAUTION: Make sure that the release cable is removed from the door trim panel using the plastic fixing and not using the cable.
- See figure.
- Remove the front door trim panel.
- See figure.NOTE: Do not disassemble further if the component is removed for access only.
- See figure.
- See figure.
- See figure.
- See figure.
- Release the retaining tang.
- See figure.
CAUTION:
Take extra care not to damage the component.
CAUTION:
Make sure that the clips are correctly located.
CAUTION:
Take extra care not to damage the wiring harnesses.






















