| Stoplamp(s) inoperative |
- Bulb failure
- LED lamp failure
- Fuse(s) blown
- Stop lamp circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Brake pedal switch fault
|
- Check the bulb(s)
- Check the LEDs
- Check the fuses
- Refer to the electrical circuit diagrams and test the stop lamp circuit for short circuit to ground, open circuit, high resistance
- Using the manufacturer approved diagnostic system, check datalogger signal - Brake Switch (0x0416)
- Using the manufacturer approved diagnostic system, check the Engine Control Module (ECM) for related DTCs and refer to the relevant DTC index
|