LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel And Console >> Instrument Panel And Console >> Removal And Installation >> Instrument Panel Upper Section >> Installation

Instrument Panel Upper Section: Installation

  1. Install the windshield defroster duct.
    • Tighten the screws.
  2. Install the passenger air bag module.
    • Tighten the nuts to 10 Nm (7 lb.ft).
  3. With assistance, install the instrument panel upper section.
    • Tighten the screws.
    • Attach the wiring harness.
  4. Tighten the instrument panel upper section speaker aperture bolt to 10 Nm (7 lb.ft).
  5. Secure the passenger air bag module bracket.
    • Tighten the Torx screws to 25 Nm (18 lb.ft).
  6. Connect the passenger air bag module electrical connectors.
  7. Install the instrument panel passenger side reinforcement upper retaining screws.
  8. Install the sunload sensor.
    • Connect the electrical connector.
    • Secure with the clips.
  9. Install the A-pillar trim panels. Refer to A-Pillar Trim Panel information.
  10. Install the speaker Refer to Instrument Panel Speaker information.
  11. Install the stowage compartment tray.
    • Secure the 4 clips.
  12. Install the passenger side register trim panel. Refer to Passenger Side Register Trim Panel information.
  13. Install the instrument panel driver side reinforcement. See Instrument Panel Driver Side Reinforcement .
  14. Connect the battery ground cable. Refer to Specifications information.
scientia non olet · About LEMON Manuals