Pinpoint Test C : Buckle Pre TENSIONER Diagnostic

C1: DIAGNOSTIC PROCEDURE

WARNING: Prior to any work on the SRS system the vehicle battery must be disconnected system the vehicle battery must be disconnected

WARNING: Please wait for 120 seconds to allow the air bag deployment energy reserve to dissipate

Remove seat and check routing and condition of under-seat harness
Ensure harness is in good condition with no damage
Ensure harness is securely routed
Ensure all fir tree clips and cable ties are correctly installed
Reinstall seat
Ensure harness is securely routed
Reconnect the vehicle battery
Clear the DTC, cycle the ignition state off / on wait 30 seconds and re-test
To confirm repair. While sitting in seat, retest as follows:
- Seat fully up - move fully backwards and forwards
- Seat fully down - move fully backwards and forwards

Is the warning lamp illuminated?

Yes: Install new component

No: No further action required