Passenger Air Bag Module: Removal
WARNING:
It is imperative that before any work is undertaken on the SRS system, the appropriate information is read thoroughly.
WARNING:
Always disconnect both battery cables before beginning work on the SRS system. Disconnect the ground cable first. Never reverse connect the battery.
- Disconnect the battery ground cable. Refer to Specifications article.
- Make the SRS system safe. Refer to Standard Workshop Practices article.
- Remove the instrument panel upper section. Refer to Instrument Panel Upper Section article.
- Remove the passenger air bag module.
- Remove the 4 nuts.
- Remove the passenger air bag module bracket.
- Remove the 2 nuts.
NOTE:
Do not disassemble further if the component is removed for access only.
