Pinpoint Test F: Safety Belt Retractor-Incorrect Installation

Refer to REMOVAL AND INSTALLATION  , remove any trim panels required to expose the D loop (anchor point) and the safety belt retractor

Refer to REMOVAL AND INSTALLATION  , correctly reinstall the safety belt retractor ensure that the locating "T bar" and "anti rotation pins" are correctly located

Check for correct operation twice 

Does the webbing move freely then retract correctly? 

YES:  Refer to REMOVAL AND INSTALLATION  , reinstall any trim panels, ensure there are no obstructions and the webbing does not catch or rub. No further action required

NO:  Replace as required. Refer to the warranty policy and procedures manual, or determine if any prior approval program is in operation, prior to the installation of a new module/component