Pinpoint Test G: D-Loop Not Rotating Correctly

Refer to REMOVAL AND INSTALLATION  , remove any trim panels required to expose the D loop (anchor point) and the safety belt retractor

Ensure there are no obstructions and the webbing does not catch or rub, the D loop (anchor point) rotates correctly and if installed the confirm the height adjuster operates correctly

Check for correct operation twice 

Does the webbing move freely then retract correctly? 

YES:  Refer to REMOVAL AND INSTALLATION  , reinstall any trim panels, ensure there are no obstructions and the webbing does not catch or rub. No further action required

NO:  Replace as required. Refer to the warranty policy and procedures manual, or determine if any prior approval program is in operation, prior to the installation of a new module/component