Steering Column Shaft: Removal
- Disconnect the battery ground cable. Refer to Specifications .
- Remove the driver side closing trim panel.
- Release the clip.
- Remove the 2 screws.
- Disconnect the electrical connector.
- Disconnect the steering column intermediate shaft from the steering column.
- Note the fitted position.
- Remove the special bolt and discard the nut.
- Disconnect the steering column intermediate shaft from the lower shaft.
- Note the fitted position.
- Remove and discard the bolt.
- Remove the steering column intermediate shaft.
- Release the 2 grommets.
- Remove the 2 intermediate shaft grommets.
NOTE:
Do not disassemble further if the component is removed for access only.
NOTE:
Note the fitted position.



