Front Drive HALFSHAFTS: Specifications
General Specification
| Item | Specification |
|---|---|
| Type | Fully floating, fixed length, solid shafts incorporating constant velocity joints at each end of shaft |
Lubricant
| Item | Specification |
|---|---|
| Outboard joint | Use grease supplied with replacement boot kit (Optimol MS139G) |
| Inboard joint | Use grease supplied with replacement boot kit (1 Luber C MS132G) |
General Specification
| Item | Specification |
| Type | Fully floating, solid shafts incorporating 'plug-in' constant velocity joint at inboard end and fixed constant velocity joint at outboard end of shaft |
Torque Specifications
| Description | Nm | lb-ft |
|---|---|---|
| * Stabilizer bar link nut | 115 | 85 |
| * Stabilizer link nut | 115 | 85 |
| * Tie rod end ball joint nut | 76 | 56 |
| Brake hose retaining bracket to wheel knuckle bolt | 25 | 18 |
| *+ Halfshaft retaining nut | 230 | 169 |
| Road wheel nuts | 140 | 103 |
* New nut must be fitted
+ Stake nut on completion