Front Muffler: Installation
- Position the RH tail pipe to the muffler assembly.
- Position the LH tail pipe to the muffler assembly.
- With assistance, install the muffler assembly.
- Align both tail pipes and tighten the retaining clamps to 55 Nm (40 lb.ft).
- Tighten the catalytic converter nuts and clamp to 48 Nm (35 lb.ft).
NOTE:
Do not tighten the retaining clamp at this stage.
NOTE:
Do not tighten the retaining clamp at this stage.
NOTE:
Install a new gasket.