Transfer Box Control Module Pin Out Details
Connector 1-C1319
| Pin No. | Description | Input/output |
|---|---|---|
| 1 | Not used | - |
| 2 | Not used | - |
| 3 | CAN bus low | Data (input and output) |
| 4 | Range change selection switch - High | Input |
| 5 | Range change selection switch - Low | Input |
| 6 | CAN bus high | Data (input and output) |
| 7 | Key interlock solenoid | Output |
| 8 | LED-high | Output |
| 9 | LED-low | Output |
Connector 2-C1854
| Pin No. | Description | Input/output |
|---|---|---|
| 1 | CAN bus low | Data (input and output) |
| 2 | Not used | - |
| 3 | Ignition power supply | Input |
| 4 | CAN bus high | Data (input and output) |
| 5 | Ground | - |
| 6 | Permanent battery power supply | Input |
Connector 3-C1855
| Pin No. | Description | Input/output |
|---|---|---|
| 1 | Hall sensor signal-A (directional) | Input |
| 2 | Hall sensor ground | - |
| 3 | Hall sensors supply | Output |
| 4 | Not used | - |
| 5 | Temperature sensor | Input |
| 6 | Hall sensor signal-B (speed) | Input |
| 7 | Selector position ground | - |
| 8 | 5V position sensor supply | Output |
| 9 | Selector mode solenoid ground | - |
| 10 | Selector position sensor signal | Input |
| 11 | Transmission position sensor X axis signal | Input |
| 12 | Selector mode solenoid power supply | Output |
| 13 | Transmission position sensor Y axis signal | Input |
| 14 | Manual transmission output shaft speed sensor supply | Output |
| 15 | Motor supply/ground | Input/output |
| 16 | Manual transmission output shaft speed signal | Input |
| 17 | Manual transmission output shaft speed sensor ground | - |
| 18 | Motor supply/ground | Input/output |