High/Low Range Sensor: Removal
- Raise and support the vehicle.
- Remove the crossmember. Refer to Transmission Support Crossmember - 5.0L and Transmission Support Crossmember - 3.0L Diesel article. Refer to Transmission Support Crossmember - 4.0L/2.7L Diesel article.
- Remove the high/low range sensor.
- Lower the rear of the transmission for access.
- Disconnect the electrical connector.
- Remove the 2 Torx bolts.
WARNING:
Make sure to support the vehicle with axle stands.
CAUTION:
To avoid damage to the joints or gaiters, do not allow the transmission to hang on the driveshafts.
CAUTION:
Discard the bolts.
