High/Low Range Sensor: Installation
- To install, reverse the removal procedure.
- Clean the components.
- Install the high/low range sensor.
- Tighten the Torx bolts to 10 Nm (7 lb.ft).
- Install the crossmember. Refer to Transmission Support Crossmember - 5.0L and Transmission Support Crossmember - 3.0L Diesel article. Refer to Transmission Support Crossmember - 4.0L/2.7L Diesel article.
- Using the diagnostic tool, calibrate a new high/low range sensor.
CAUTION:
Make sure that new bolts are installed.