Front Stabilizer Bar: Removal
- Raise and support the vehicle.
- Remove the wheels and tires.
- Disconnect both the stabilizer bar links from the stabilizer bar.
- Remove and discard the 2 nuts.
- Remove the fender splash shield lower extension panel.
- Remove the 2 screws.
- Remove the 2 clips.
- Remove the engine undershield. Refer to Engine Undershield article.
- Remove the front axle crossmember.
- Remove the 4 bolts.
- Remove the stabilizer bar bushing.
- Remove the 4 nuts.
- Remove the stabilizer bar clamps.
- Remove the stabilizer bar.
- Remove the stabilizer bar out through the LH side wheel arch.
WARNING:
Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
NOTE:
RH side only.



