Front Wheel Bearing And Wheel Hub: Removal
- Raise and support the vehicle.
- Remove the wheel and tire.
- Loosen the halfshaft retaining nut.
- Release the brake hose bracket from the wheel knuckle.
- Remove the bolt.
- Remove the wheel speed sensor retaining bolt.
- Release the brake caliper anchor plate from the wheel knuckle and tie the caliper aside.
- Tie aside complete with the wheel speed sensor.
- Remove the brake disc.
- Remove the Torx screw.
- Remove the halfshaft retaining nut.
- Discard the nut.
- Using the special tools, release the halfshaft from the wheel hub.
- Remove the wheel hub.
- Remove the 4 bolts.
WARNING:
Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
CAUTION:
Do not allow the brake caliper to hang on the brake hose.
CAUTION:
Do not use a hammer to detach the halfshaft from the hub assembly, failure to follow this instruction may result in damage to the halfshaft.
