Air Suspension Reservoir: Removal
- Raise and support the vehicle.
- Using T4, depressurize the air suspension. See Air Suspension System Depressurize and Pressurize .
- Disconnect the air line from the air suspension reservoir.
- Remove the air suspension reservoir.
- Remove the 4 bolts.
- Remove the Voss connector from the air line.
- Remove and discard the collet and the union.
WARNING:
Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
CAUTION:
Before the disconnection or removal of any components, ensure the area around joint faces and connections are clean. Plug any open connections to prevent contamination.
CAUTION:
The air line must only be disconnected by removal of the voss connector. Do not remove the air line retaining boss from the air suspension reservoir. Failure to follow this instruction may result in damage to the vehicle.
CAUTION:
Visually inspect the air line ends for damage or wear. Repair or replace the air line as necessary.
