Air Suspension Reservoir: Installation
- Install a new Voss connector to the air reservoir.
- Tighten the new Voss connector to 5 Nm (4 lb.ft).
- Install the air suspension reservoir.
- Locate the air reservoir to the chassis brackets, fit the bolts and tighten to 23 Nm (17 lb.ft).
- Fully seat the air line into the Voss connector.
- Pull on the air line to make sure it is fully installed into the Voss connecter.
- Using T4, pressurize the air suspension. See Air Suspension System Depressurize and Pressurize .
CAUTION:
Make sure the new Voss connector is installed and fully tightened with the alignment plug installed.