LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Land Rover >> 2012 >> LR4 HSE Lux >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Vehicle Dynamic Suspension >> Vehicle Dynamic Suspension >> Removal And Installation >> Air Suspension Compressor Drier >> Installation

Air Suspension Compressor Drier: Installation

  1. Install a new O-ring seal.
    • Lubricate the O-ring with a lithium based grease.
    2. NOTE: If equipped, make sure the air suspension compressor retaining cable is correctly routed around the compressor cylinder head.
  2. Install the air suspension compressor drier.
    • Install the retaining screw and tighten to 3 Nm (2.2 lb.ft).
    3. CAUTION: Visually inspect the air line ends for damage or wear. Replace the air line as necessary.
    CAUTION: Pull on the air line to make sure it is securely installed in the connector.
  3. Connect the air line to the air suspension compressor drier.
    • Attach the air line to the retaining clip.
  4. Install the air suspension compressor. See Air Suspension Compressor . .
scientia non olet · About LEMON Manuals