Air Suspension Compressor: Removal
WARNING:
Steps 1 and 2 must be carried out within 10 minutes of each other, failure to follow this instruction may result in personnel injury.
CAUTION:
If a new air suspension compressor, air compressor drier or air compressor delivery valve kit is installed due to failure, an air compressor relay must be installed. Failure to follow this instruction may result in damage to the air suspension system components.
- Open the front door.
- Raise and support the vehicle, make sure at least one of the wheels is off the ground.
- Remove the air suspension compressor lower cover.
- Remove the bolt.
- Release the 5 clips.
- Remove the air suspension compressor.
- Disconnect the 3 air lines.
- Disconnect the 2 electrical connectors.
- Remove the 3 bolts.
CAUTION:
Make sure the ignition switch is turned off, the park brake is on and the selector lever is in park position.
WARNING:
Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.
CAUTION:
Always plug any open connections to prevent contamination.
NOTE:
Access to the top compressor fixing bolt is very restricted. It is advisable to use a 3/8 inch drive socket with a flexible coupling.
