Rear Air Spring: Installation
- Install a new Voss connector to the air spring.
- Tighten to 3.5 Nm (2.6 lb.ft)
- Install the rear air spring.
- Make sure the spring and shock absorber assembly top mounting to body mating faces are clean.
- Connect the air line into the Voss connector.
- Fit the nuts and tighten to 63 Nm (46 lb.ft).
- Connect the shock absorber and spring assembly to the lower arm.
- Tighten the nut and bolt to 300 Nm (221 lb.ft).
- Using T4, pressures the air suspension. See Air Suspension System Depressurize and Pressurize .
- Install the wheel and tire.
- Tighten the wheel nuts to 140 Nm (103 lb.ft).