Removal And Installation: Liftgate: Installation
- With assistance, install the liftgate assembly.
- Tighten the bolts to 40 Nm (30 lb.ft).
- Connect the struts and secure with the clips.
- Attach the liftgate wiring harness.
- Install the grommet.
- Connect the electrical connectors.
- Connect the washer jet hose.
- Install the liftgate side trim panel.
- Secure with the clips.
- Repeat the above procedure for the other side.
- Install the liftgate upper trim panel.
- Connect the battery ground cable. Refer to Specifications
.
- Check and adjust the liftgate to roof panel profile. See LIFTGATE ALIGNMENT .