Glass Roof Panel: Removal
CAUTION:
Always protect paintwork and glass when removing exterior components.
CAUTION:
Always protect the interior components when removing body glass.
CAUTION:
Lay the glass on felt covered supports. Do not stand on edge as this can cause chips which subsequently develop into cracks.
NOTE:
The following equipment is required: l Cutting wire and handles l Kent knife l Glazing knife l Glass replacement kit l Sealant applicator gun l Suction cups l A felt covered table or stand to support glass
- Remove the headliner. Refer to Headliner .
- Remove the roof moulding.
- Release the 3 clips.
- Repeat the above procedure for the other side.
- Remove the antenna.
- Disconnect the cable.
- Remove the 2 screws.
- With assistance, remove the roof panel fixed glass.
- Carefully cut through the sealant using a glazing knife or cutting wire.
- Attach the suction cups.
- Noting fitted position, remove the 11 spacers.
WARNING:
Eye protection must be worn.
