Pinpoint Test H: Water Ingress

H1: GLASS PANEL 

1. Carry out visual inspection of the glass panel alignment to the roof aperture REFER to: Roof Opening Panel Alignment . Correctly relocate the glass panel as required
2. Perform the manual roof opening panel initialization procedure REFER to: Power Roof Opening Panel Initialization .

Is the alignment correct?

Yes: 

GO to H2  .

No: 

Contact dealer technical support

H2: SEAL - LOCATION 

1. Carry out visual inspection of the seal on the glass panel for location and damage

Is the glass panel seal correctly located and intact?

Yes: 

GO to H3  .

No: 

Install new glass panel. REFER to: Roof Opening Panel Glass . Conduct a water leak test REFER to: WATER LEAKS . (1)  If correct no further action required. (2)  If leak still evident GO to H3  .

H3: DRAIN TUBES - FREE FROM DEBRIS 

1. Carry out inspection of the drain tubes REFER to: Driver Side Roof Opening Panel Front Drain Hose , REFER to: Passenger Side Roof Opening Panel Front Drain Hose .

Are the drain tubes free from debris?

Yes: 

GO to H4  .

No: 

Remove the obstruction to ensure flow through the drain tubes and conduct water leak test REFER to: WATER LEAKS . (1)  If correct no further action required. (2)  If leak still evident GO to H4  .

H4: ASSEMBLY FRAME 

1. Carry out visual inspection of the frame for cracks and damage

Is the frame damaged (allowing water ingress)?

Yes: 

Install a new roof opening panel REFER to: Roof Opening Panel .

No: 

If concern still evident contact dealer technical support