Pinpoint Test B: Buckle Pre TENSIONER Diagnostic
B1: DIAGNOSTIC PROCEDURE
WARNING:
Prior to any work on the SRS system the vehicle battery must be disconnected system the vehicle battery must be disconnected
WARNING:
Please wait for 120 seconds to allow the air bag deployment energy reserve to dissipate
- Check routing and condition of harness along buckle pre tensioner tube
- Pre 10 model year : x2 cable tie & tape
- Post 10 model year : Cradle
- Ensure harness is in good condition with no damage
- Ensure harness is securely routed
- Reconnect the vehicle battery
- Clear the DTC, cycle the ignition state off / on wait 30 seconds and re-test
- To confirm repair. While sitting in seat, retest as follows:
- Seat fully up - move fully backwards and forwards
- Seat fully down - move fully backwards and forwards
Is the warning lamp illuminated?
Yes: GO to Pinpoint Test C
No: No further action required